Loading...

We can lend it out and help along the lines there. I can tell you how big the bit is later. Okay, yeah, take a measurement. If you can get a measurement or a picture of the mouse. Especially if you detach the bucket, I think you probably have the same setup as my bodies. And that was actually pretty easy to do. And I just give you some ideas. So I can sta...

got creative evil prehistoric oil well i don't have different uh... uh... it's for it but i've got a three point auger yeah you can come a little far that's all good stuff to have yeah i don't know if it needs to be worked on if you guys need one uh... i think it's good for a category one uh... three point all the stuff you want to hang on to you want to...

and that's how I would wind up doing it without the spear. Yeah, I guess you got to sharpen your fork. That would probably make it spear a little easier. Or we can put something on the underside of it. But then you can lose your fork capability too. It's just nice to have all those implements. I'm slowly going to get my implement pile built up. I think I'...

tomorrow and you can kind of get the idea. So yeah, let's see what we can do then. Okay, so you say I believe there's a 40 horse. A friend that has a 40 horse, John Deere. Kind of might be the same thing. And he don't know how kinds of little goodies for his. So yeah, send me that. So yeah, we could put something up that'll work on that quick. It's an act...

Well, I can do that. I can take a picture. What I'm looking at is the possibility of just removing the bucket and having this set up on the arms with pins. I might need to take a look at the pictures that I wind up sending. Okay, so you talk about a spear on just one of the arms, not a whole structure where the spears in the middle and just run it off of...

I could take something like that and just put a haser you want to back into a bale of hand lift it up right? No I'd use it like the the quick disconnect is the front. So I'd like to match it up with with that. Okay, but yeah I had to build something for the disc and that kind of needed you can just fight just to frame where you can do your own thing. I've...

Okay, 27M D Mobile. Hey, Dan, where you at? Ohhh Coming up on exit 107 Okay, a little bit slow. I just... I make good time, but when I get to that end of the quality, it gets really slow. Then it's scary. Yeah, well, it's scary down here too, going to buy the zoo. I want to hit you up, find out if you're ready, willing, and or able to work on that hay spe...

Welcome to K7CPR repeater, the temperature at the repeater is 66 degrees.

Take care 7SFW.

Thanks for watching!

Alright, don't let you go. W-7-H-P-P. Yeah, no card for it tonight. Mm-hmm. Alright, W-7-H-P-P.

Welcome to K7CPR repeater, the temperature at the repeater is 67 degrees. Well, I think my truck's back to the station. The engine just went by going towards the main station and the command vehicle too. So I'm sure it's there, so I get to do my check and go home and come back. Okay, kill two birds with one stone, sounds like a plan. Yeah, and I'm just ab...

I would think so. You can actually run in one corner kind of backwards, but it doesn't need to shut the PTO on and off. You can just raise it up, back in and drop the unit back down with a three point there. So anyway, it would be interesting to see how it works. I've been watching videos of a flail mower versus brush hogs. I think that flails are way bet...

I mentioned that it probably wouldn't be a good idea. Just because of fire nature and that kind of mowing that like that. Pretty good chance of a spark. Extremely good, Jim. Especially the flamour. That should be here before then too. That would be interesting. I'm going to get that hooked up to get it all set and adjusted. That's probably going over in s...

but anyway yeah they're they're working on it pretty hard so hopefully it'll be a close issue I saw that one is the land hills fire and got that across such a long way away compared to this one but they can cover a lot of ground there when it gets windy you weren't planning on taking an tractor over here in August were you oh that's probably not a good ti...

We're getting some of it under control. That's actually moved north. It's west of O-Mac. I'm off in the hill here a little bit, but yeah, it's the west of O-Mac. When we go back over, it's going to look a little different. There's going to be a long 97 there. It's going to be bridge. Looks like we're going to see some front area. It'll be the edge on the...

job. So yeah, maybe they're done. They put the truck back in there. Yeah, maybe that being old fire is about trunk D nine hundred acres. Now I get it all started from a house fire. And the wind is slowed way down. Now it's moving kind of flowing in from the north. How? Northeast so kind of a Southwest wind. Long in the other direction. I see it's still sp...

of the seven HCP Where do you disappear to? Oh, call the wife call Oh, okay, cause I called you there Yeah, I don't know what to do, I'm a trucker, they need not that station, so Oh well I think I got rid of them fingers, they're probably firing, they don't need you anymore Oh, they need me This place is collapsed without you done Yeah, I'm going home I g...

KJC7AOP!

congregation,

ah W7 HBB HB7 AVI

Okay, I got stopped the fire station here. I don't know what they did with my truck. Oh, they already made some repairs on it? No, they're doing hose testing today and the painters are out there painting where the truck sets. So, I don't know when they're going to bring my truck back. Make sure they don't get any overspray on your truck. Oh, that's in the...

70 Surgery when you call We're going what? Surgery a little basal cancer here. They have to take a little knob off I still didn't get that something about Facial cancer? Yeah, remember on my neck, I had a little spot on my shoulder here and they had to take that off You text me right when I was in the chair That's fine, I didn't expect your fire. That's w...

Thanks for watching!

O-A-R-S repeater system N-T7H