{"ai_pass_count":4,"analysis_step_count":13,"confidence":0.8886216732362906,"created_at":"2026-06-26T16:06:50.660283+00:00","id":124378,"node_number":"683210","processing_time":2.518638849258423,"recent_steps":["net.store_session","callsign.qrz_verify","callsign.llm_extract","callsign.regex_extract","net.llm_structured_analysis"],"recording_id":124377,"text":"like with that project, but it all works. I'm sure it'll be fine. I just need to find the fittings that I need, which is why I'm in the house sitting in my computer right now. I'm scouring for a few NPT fittings to adapt it to what I use. It came with some fairly large half-inch fittings on it that don't make anything I have. I need something a little smaller, so I'm looking for some adapters. When I do this, I always find it a little curious. You have a half-inch NPT fitting, and if you measure that half-inch NPT fitting with a pair of calipers, it's closer to three-quarters of an inch outside diameter. So I guess the size must refer to the interior. I'm not quite sure, but I always have to remind myself that the nomenclature is a little with buried on that stuff. I have to be careful."}